Install the Projector Brackets have most essential points, it can mainly separated into four parts. Installation of Projector Brackets, installation of projector, electrical connection along with the adjustment of the height of the Projector Brackets.
Installation of Projector Brackets: upon the the brackets can be a square frame, you can find 8 via holes diameter of 6mm, the eight holes are fixed pieces of hangers and the ceiling connected to the upper mounting holes. Fixtures installed base surface plus the ceiling surface, the distance is hidden under the projector to the ceiling inside might possibly be. Should you reach the peak hidden inside, this distance ought to be greater than the height of hanger contraction height of the projector itself.
Installation of projector: at the bottom of the Projector Brackets is a fixed universal bracket, according to the size of the projector, adjust the fixed universal hanger rod, connected to the projector.
Electrical connection: based on the wiring diagram is connected to the power cord and the control line properly.
Adjustment of the height of the Projector Brackets: there are actually two hanger upper limit switch, controling the upper and lower positions of the brackets respectively. Loosen the bolts on it, move around by tag trip switch to adjust the hanger position and then tighten the small bolts.
.
没有评论:
发表评论